Table of Contents
Advertisement
SOFTWARE FEATURES
• The ErgoFit Wireless Optical Mouse is designed to work
seamlessly in virtually any environment. Should you
encounter an operational problem, it may be due to
interference from other devices in your environment.
To resolve the problem, please refer to the ID Mode, and
Non-ID Mode information below.
ID Mode: Suggested working environment - Office
Press Sync button on the receiver. Press Sync button on the mouse
until the LED-on receiver turns off. The ID Mode is set.
Non-ID Mode: Suggested working environment - Home
or SOHO Office
Press Sync button on the receiver for approximately five seconds.
Note the light will dim after releasing button. When light is
dimmed, Non-ID Mode is set.
14
Advertisement
Table of Contents
