Silvercrest SEM 1100 A1 Operating Instructions Manual page 13

4) Insert the sieve carrier
SERT" and then turning it anticlockwise to the marking "LOCK".
5) Place one (or two) cup(s) under the sieve carrier openings. We recommend
that you rinse the cups out with hot water beforehand, so that the espresso
does not cool so quickly.
6) As soon as the green heating-up control lamp
tary switch 5 to the position "
WARNING
Never remove the sieve carrier w during the espresso output!
The resulting spray of hot espresso would lead to injury!!
► Always ensure that the rotary switch
the sieve carrier w.
7) When the cup(s) are fi lled to the desired quantity (about 20 ml), turn the
rotary switch 5 back to the position "
You can now drink the espresso.
8) After every use, remove the used espresso powder from the espresso sieve
q. To do this, fold the sieve blocker e upwards so that the espresso
sieve 0 q cannot fall out of the sieve carrier w. Now empty the espresso
sieve 0 q.
NOTICE
► Absolutely clean the hot water shower
chapter "Cleaning and Care".
NOTICE
► Regularly empty the drip tray
recess 7 of the drip grill 8 is visible.
Espresso Machine
w into the appliance by placing it at the marking "IN-
". The espresso fl ows into the cup(s).
5 stands at "
".
t after every use. Refer to the
r, at the latest when the red fl oat in the
4 glows, you can turn the ro-
" before you remove
GB
IE
0
11