Table of Contents
Advertisement
7. Getting started
7.1. Connecting to the power supply
The portable MP3-CD player can be operated with ...
•
the supplied mains adapter plugged into a mains socket
•
or with batteries.
7.1.1. Mains operation
To operate the portable MP3-CD player from the mains ...
1
Insert the plug on the cable of the mains adapter in the "DC 4.5 V" socket on the left-
hand side of the portable MP3-CD player.
2
Set "Off" with the "CHARGE" slide on the underside of the MP3-CD player.
3
Plug the mains adapter into a mains socket. The portable MP3-CD player is automatically
switched over to mains operation. This means that any batteries which may be in the battery
compartment do not have to be removed.
The portable MP3-CD player is now operational.
Warning!
™
The use of unsuitable mains cables from other appliances can give rise to the danger of an
electric shock!
Please note!
ô
Only use the supplied mains adapter to connect the portable MP3-CD player to the mains!
The use of mains adapters that were not intended for the portable MP3-CD player can re-
sult in irreparable damage to the player!
7.1.2. Battery operation
Proceed as follows to operate the portable MP3-CD player with batteries ...
1
Set "OFF" with the "CHARGE" slide on the underside of the MP3-CD player.
2
Open the CD compartment by pushing the "OPEN" slide to the right.
3
Open the battery compartment cover.
12 | Operating Instructions
Advertisement
Table of Contents
