Charging - bq Edison 3 Mini Manual

3 Charging

 Plug the DC end of adapter to the USB port of the
device and plug the AC end to the wall socket for
charging.
 Normally it takes approximately
charge the device. Operating the device during
charging with the AC adapter may extend the time of
full charging.
 The connection to USB interfaces has to be limited to
USB 2.0 version or higher. The connection to so
called power USB is prohibited.
 Use only the AC adapters, power cords and batteries
that are approved for use with this device. Use of
another type of battery or AC adapter may cause fire
or explosion.
4 Inserting a Memory Card
 The device supports micro SD/SDHC cards.
 To insert a micro SD card, place the card connector
towards the front side of the device and the printing
side of the card towards the rear side of the device.
9
5 hours to fully