Charging The Device And Transferring Files - bq Edison 3 Complete User's Manual

ENGLISH

Charging the Device and Transferring Files

Your tablet contains a rechargeable (non-removable) 7000 mAh battery, which is
charged via the micro-USB port at the top of the device. A USB to micro-USB cable
and mains adapter are provided with the tablet. To charge it, follow these simple steps:
A) Using the mains adapter:
1. Plug the USB cable into the mains adapter.
2. Connect the mains adapter to any standard plug socket (220 V / 50 Hz).
3. Plug the other end of the cable into the micro-USB port on your tablet.
B) Using a laptop or desktop computer:
1. Plug the USB cable into a compatible USB port on your computer.
2. Plug the other end of the cable into the micro-USB port on your tablet.
The battery in your BQ Edison 3 / Edison 3 3G is non-removable. If it is removed
by anyone other than our Technical Support staff, your device could be damaged
and the warranty invalidated.
Allowing the battery to charge fully is recommended when you charge it for the
first time as this will help calibrate the battery meter. Bear in mind that some
batteries perform better after a number of full charge/discharge cycles.
The time required to charge your device may vary slightly depending on whether
it is charged via the mains adapter or via a computer USB port.
Complete User Manual
Getting Started
13
Edison 3 / Edison 3
3G