Installation; Professional Installation; Mounting; Cabling - Gemtek WAPS-232N*AS Installation Manual

Installation Guide of the RFID IOT Access Point

3 Installation

3.1 Professional Installation

The RFID IOT Access Point, and any associated accessories require professional
installation; a) installation of the equipment must be controlled, b) installation must be
performed by professionals, c) installation of the equipment requires special training.

3.2 Mounting

As described earlier, the RFID IOT Access Point comes with a mount kit for
mounting on a pole. The antennas can be directly connected to the RFID IOT Access
Point, or preferably be extended and mounted on the pole at a meter apart.

3.3 Cabling

Connections
Connect GPS antenna cable to "Ant2"
Connect the 915MHz antenna cables to "Ant3" and "Ant4"
Connect the Power (PoE) to the Access Point at the POE connector

3.4 LED Indicators


None
Gemtek Technology Co., Ltd.
In Commercial Confidential
V0.2
6/8