Windows 2000 - Belkin DockStation F5U216 User Manual

P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 12

Windows 2000

Note: Do not connect the DockStation to your computer's USB port until
instructed to do so.
1. Insert the Belkin installation CD into your CD-ROM drive.
2. After a few moments the CD will auto-start. Click the "Install Driver"
button to begin the installation process.
3. The installer opening screen will be displayed. Click "Next" to
continue.
4. The installer information screen will be displayed next. Read the
instructions then click "Next" to continue.
5. Windows will display a "Digital Signature Not Found" message. Select
"Yes" to continue the driver installation procedure.
6. Select "Yes, I want to restart my Computer now", and click "Finish".
7. Click "Finish" again to restart your computer.
8. After Windows restarts, connect the DockStation to your computer's
Hi-Speed USB 2.0 port.
9. Windows will now detect and install "Generic Hub on USB 2.0 Bus".
10. The "Found New Hardware Wizard" will now detect the "Belkin USB
to Fast Ethernet Adapter". A "Digital Signature Not Found" message
will be displayed. Click "Yes" to continue.
11. The parallel port, and serial port will now be located and installed.
No further user input is required.
12. Proceed to "Verifying Proper Installation".
DRIVER INSTALLATION
12