Driver Installation; Windows 98 Se - Belkin DockStation F5U216 User Manual

P74321ea_F5U216_manual_uk 02-06-2003 15:59 Page 6

Windows 98 SE

1. Insert the Belkin installation CD into your CD-ROM drive.
2. After a few moments, the CD will auto-start. Click the "Install Driver"
button to begin the installation process.
3. The installer opening screen will be displayed. Click "Next" to
continue.
4. The installer information screen will be displayed. Read the
instructions, then click "Next" to continue.
5. The DockStation drivers will be copied to your hard drive. Click
"Finish".
6. Select "Yes, I want to restart my computer now", then click "Finish".
7. Click "Finish" again to complete the installation process, and restart
your computer.
8. Plug the DockStation USB connector into an available Hi-Speed USB
2.0 port on your computer.
9. The "Add New Hardware Wizard" will launch and search for drivers for
"Generic Hub on USB 2.0 Bus". Click "Next".
10. Select "Search for the best driver for your device (Recommended)".
Click "Next".
11. Remove the check marks from all available options, then click "Next".
12. The "Add New Hardware Wizard" will locate the driver for "Generic
USB Hub on USB 2.0 Bus". Click "Next".
13. Click "Finish" to complete installation of the DockStation's Hi-Speed
USB 2.0 hub functionality.
14. Windows will locate the driver for "Belkin USB to Fast Ethernet
Adapter". Click "Next".

DRIVER INSTALLATION

6