Table of Contents
Advertisement
Interface Command Summary continued.
Command Description
Set cutout to be reset manually-
Set cutout to be reset
automatically
Serial Interface Menu
Read serial sample setting
Set serial sampling setting to n
seconds
Set serial duplex mode:
Set serial duplex mode to full
Set serial duplex mode to half
Set serial linefeed mode:
Set serial linefeed mode to on
Set serial linefeed mode to off
Calibration Menu (Warning: Changing the calibration values may change the instrument accuracy)
Read low set-point limit value
Set low set-point limit to n
Read high set-point limit value
Set high set-point limit to n
Miscellaneous (not on menus)
Read firmware version number
Read structure of all commands
Legend:
Note:
Command
Format
cm[ode]=r[eset]
cm[ode]=a[uto]
sa[mple]
sa[mple]=n
du[plex]=f[ull]/h[alf]
du[plex]=f[ull]
du[plex]=h[alf]
lf[eed]=on/of[f]
lf[eed]=on
lf[eed]=of[f]
*tl[ow]
*tl[ow]=n
*th[igh]
*th[igh]=n
*ver[sion]
h[elp]
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
the current set-point and "s=50.00"<CR> will set the set-point to 50.00
degrees.
In the following list of commands, characters or data within brackets, "[" and
"]", are optional for the command. A slash, "/", denotes alternate characters or
data. Numeric data, denoted by "n", may be entered in decimal or exponential
notation. Bold type characters are literal characters while normal type symbol-
Command
Example
Returned
cm=r
cm=a
sa
sa: 9
sa=0
du=f
du=h
lf=on
lf=of
*tl
tl: 999
*tl=-80
*th
th: 999
*th=205
*ver
ver.9999,9.99
h
list of commands
Digital Communication Interface
Returned
Acceptable
Example
Values
sa: 1
0 to 4000
FULL or HALF
ON or OFF
tl: –80
–999.9 to 999.9
th: 205
–999.9 to 999.9
ver.2100,3.56
47
Advertisement
Table of Contents
