Table of Contents
Advertisement
User's Guide
Figure 4 Back Panel
20
3
2
4
9
WARNING: Extreme care must be taken to prevent harm to the user or
the surrounding environment. Do not exceed a 120°C fluid temperature for
draining. The valve could be damaged if 120°C is exceeded. Insulate the
container from the floor or other objects that may be damaged by high
temperatures as required.
9) A drain valve is provided for ease of removing the fluid media from the
bath. It is advisable to use a container of adequate size to hold the full
load of fluid. Some oils are more easily drained at higher temperatures.
10) The SYSTEM FUSES (not shown) are located inside the cabinet. If the
fuse needs to be replaced, contact a service center for assistance.
1
RS-232
7
IEEE-488
8
6
5
Advertisement
Table of Contents
