ABB ControlMaster CMF Manual page 11

6
Access levels and security options
Access levels
Operator View mode
Access Level
Logout
Read Only
Basic
Advanced
Service
Back Select
Access Level menus
Logout
Read Only
Basic
Advanced
Service
Security options
Passwords can be set to enable secure end-user access at 2 levels: Basic and Advanced The Service level is password-protected
and reserved for factory-use only.
Passwords are set, changed or restored to their default settings at the Device Setup / Security Setup parameter – see page 14
(CMF310 controller) or 15 (CMF160 indicator).
IMPORTANT (NOTE) When the CMF310 controller (or CMF160 indicator) is powered-up for the first time the Basic and
Advanced level levels can be accessed without password protection. Protected access to these levels must be allocated on-site
as required.
CI/CMF160/310–EN Rev. C
The Access level menus are used to enter Basic and Advanced menus, view all parameters in Read Only mode
and to logout (back to Operator View mode).
To view Access Level menus:
1. From the Operator View mode:
— press ,
OR
— press to display the available Operator menus and use the
Enter Config. mode, then press
The Access Level menus are displayed.
2. Use the / keys to scroll to the required / permitted level of access
(Basic or Advanced), then press
3. Refer to page 14 for Controller / Indicator menu options or page 15 for Indicator menu options.
Notes.
A 5-minute time-out period enables a user to return to the Operator View and re-access the previous menu
(displayed at exit) without re-entering the password. For periods over 5-minutes (or if Logout is selected), a
password must be entered to access protected levels.
Service level is reserved for factory-use only and is not enabled for end-users.
Displayed after Basic or Advanced level are accessed.
Logs the user out of Basic or Advanced level.
If passwords are set, a password must be entered to access these levels again after selecting Logout.
Enables all parameter settings to be viewed.
Enables access to the Basic level and adjustment of PID parameters, enabling autotuning configuration and
adjustment of alarm trip points.
Enables configuration access to all parameters.
Reserved for use by authorized service personnel.
.
.
/ keys to scroll to the
11