Cutting Deck - Exmark Lazer Z Operator's Manual

Front Caster
Semi-Pneumatic
Deck Size "00"
Models
Quantity 2
Tread Smooth
Size (60 & 13 x 6.50-6
72 Decks)
Size (48 & 13 x 5.00-6
52 Deck)
E-Series:
Pneumatic (Air filled)
Deck Size 48 & 52
Quantity 2
Super Turf
Tread
Size 23 x 9.50-12
Ply Rating 4
Pressure 13 psi (90 kPa)
Front Caster
Semi-Pneumatic
Deck Size "A1" and
"C1"
Models
2
Quantity
Tread Smooth
Size 13 x 6.50-6
Ply Rating
Pressure

Cutting Deck

• Cutting Width:
– 48 inch Deck: (121.9 cm)
– 52 inch Deck: (132.1 cm)
– 60 inch Deck: (152.4 cm)
– 72 inch Deck: (182.9 cm)
"A2" "A1" and
Models "C1"
Models
2 2
Smooth Smooth
13 x 6.50-6
13 x 5.00-6
Drive
60 & 72
2
Super Turf
24 x 12.00-12
4
13 psi (90 kPa)
Pneumatic
(Air filled)
"A2" "C2", "A3"
and "00" Models
Models
2 2
Smooth Smooth
13 x 5.00-6 13 x 6.50-12
4
13 psi
(90 kPa)
• Discharge:
– Side Discharge: Non "R" models
– Rear Discharge: "R" models
• Blade Size: (3 ea.)
– 48 inch Deck: 16.25 inches (41.3 cm)
– 52 inch Deck: 18.00 inches (45.7 cm)
– 60 inch Deck: 20.50 inches (52.1 cm)
– 72 inch Deck: 24.50 inches (62.2 cm)
• Blade Spindles:
– X-Series: Solid steel spindles with 1.18 inch
(30 mm) I.D. bearings.
– S and E-Series: Solid steel spindles with .984
inch (25 mm) I.D. bearings.
• Deck Drive:
Electric clutch:
– 48 and 52 inch, 60R, 72R Decks: "B" Section
belt with self-tensioning idler.
– 60 and 72 inch Decks: 5V Section belt with
self-tensioning idler.
• Deck:
– Side Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
provide maximum turf protection. Deck
design allows for bagging, mulching or side
discharge.
– Rear Discharge: Full floating deck is attached
to out-front support frame. Anti-scalp rollers
and side bumpers provide maximum turf
protection. Deck design allows for rear
discharge or finish cut (reduced discharge).
◊ 48 inch Deck: 3 anti-scalp rollers
◊ 52 inch Deck: 3 anti-scalp rollers
◊ 60 inch Deck: 4 anti-scalp rollers
◊ 72 inch Deck: 6 anti-scalp rollers
◊ 60 inch Deck-Rear Discharge:
4 anti-scalp rollers
◊ 72 inch Deck-Rear Discharge:
4 anti-scalp rollers
• Deck Depth—All Deck Series: 5.5 inches (14 cm)
• Cutting Height Adjustment:
Foot activated lever is used to adjust the cutting
height from 1 inch (2.5 cm) to 5 1/2 inches (14
cm) in 1/4 inch (6.4 mm) increments.
• Mulching Kit: Optional.
23
Specifications