Sigma SD10 User Manual page 94

TO STOP/PAUSE A SLIDESHOW
Press ＜ CANCEL ＞ to stop a slideshow and return to the previous view
(Single-Image, Contact Sheet, etc.).
• The image that the slideshow stops on will become the currently selected image.
TIP
•
It will not be possible to resume a slideshow that has stopped automatically after
the last image. (See P.95 for setting slideshow repetition.)
•
Pressing ＜
slideshow, however, it will not be possible to resume a slideshow stopped in this
manner.
TO RESUME A STOPPED SLIDESHOW
1
Press ＜
Menu.
2
Use the ＜
controller to select the Slideshow Menu.
3
If not already selected, use the ＜
arrows on the 4-way controller to select
"Resume show".
4
Press ＜
and resume the slideshow.
• The slideshow will resume with the next image
in the sequence following the one the slideshow
was stopped on.
MENU＞, ＜
VIEW＞ or the shutter release will also stop a
SHOWING A SLIDESHOW
MOD ＞ to display the Modification
／ ＞ arrows on the 4-way
OK＞ to close the Modification Menu
／ ＞
94