Sigma SD10 User Manual page 50

WHITE BALANCE OPTIONS
OPTION COLOR TEMP. DESCRIPTION

Auto
(Default)
Approx. 5400 K
Sunlight
Shade Approx. 8000 K
Approx. 6000 K
Overcast
Approx. 3150 K
Incandescent
Fluorescent Approx. 4100 K
Approx. 5850 K
Flash

Custom
Select this setting to allow the camera to automatically
determine the appropriate white balance adjustments.
Select this setting when taking pictures in full sunlight.
Select this setting when taking pictures in the shade under
sunny skies.
Select this setting when taking pictures under cloudy,
overcast skies.
Select this setting when taking pictures indoors under
incandescent (tungsten) lighting.
Select this setting when taking pictures indoors under
fluorescent lighting.
Select this setting when taking pictures with the Sigma
EF-500 DG flash.
Select this setting when using a custom white balance. Use
the "Set Custom WB" menu option to create a custom white
balance setting. The "Custom" option will not be available if
no custom white balance has been set.
1
Make sure the camera is turned on.
2
Press the ＜
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use ＜ ／
to select "White Balance".
4
Press ＜ ＞ arrow or ＜
sub-menu.
5
Use ＜ ／
to select desired white balance setting.
6
Press ＜ ＞ arrow or ＜
setting or ＜
close sub-menu without making any changes.
SETTING THE WHITE BALANCE
MENU＞ button on the back of
＞ arrows on the 4-way controller
＞ arrows on the 4-way controller
OK ＞ to apply the
＞ arrow or ＜
OK ＞ to open
CANCEL＞ to
50