Sigma SD10 User Manual page 108

TO SET AUTO POWER OFF
1
Make sure the camera is turned on.
2
Press the ＜
MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use ＜ ／ ＞ arrows on the 4-way controller
to select "Auto Power Off".
4
Press ＜ ＞ arrow or ＜
sub-menu.
5
Use ＜ ／ ＞ arrows on the 4-way controller
to select desired setting.
6
Press ＜ ＞ arrow or ＜
setting or ＜ ＞ arrow or ＜
close sub-menu without making any changes.
AUTO POWER OFF
OK ＞ to open
OK＞ to apply the
CANCEL＞ to
108