Page 2
TRANSMITTER ON MICRO RUN Pull out the stop button and the transmitter is switched on. The Push in the button for MICRO and the diode lamp for micro lights. operation indicator lamp (STATUS) starts blinking and the The micro-run movements are only at lowest speed in micro-run transmitter is on.
Page 3
AUTOMATIC SWITCH OFF CHARGING INSTRUCTIONS FUNCTION • The transmitter should be set on charge as often as possible. The transmitter is equipped with automatic switch-off function, switching off the transmitter after 2, 5, or 15 minutes after the latest • The battery has got power for 10 hours continuous operation. use depending on what period of time has been looped.
Page 4
INSTRUCTIONS FOR CRANE OPERATORS Find out where the crane's main power disconnector is in order to be able to quickly switch off if required. These instructions have to be followed. Marked Check that the radiotransmitter operates on the crane which Never hand over the transmitter to anybody who has not got you are going to drive (ex.
Need help?
Do you have a question about the REMOTUS BC7400 and is the answer not in the manual?
Questions and answers