Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Akerstroms Manuals
  4. Transmitter
  5. REMOTUS BC8518
  6. Driving instruction

Akerstroms REMOTUS BC8518 Driving Instruction

Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Enlarged version
DRIVING INSTRUCTION
REMOTUS BC8518
928754-000
MANUAL BC8518 No. 928754-000
Version: C1 Approved by: ME
Variant 1.
Page 1 (11)
MANUAL BC8518 No. 928754-000
Version: C1 Approved by: ME
Page 2 (11)

Advertisement

loading
Need help?

Need help?

Do you have a question about the REMOTUS BC8518 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Akerstroms REMOTUS BC8518

Summary of Contents for Akerstroms REMOTUS BC8518

  • Page 1 Variant 1. DRIVING INSTRUCTION REMOTUS BC8518 928754-000 MANUAL BC8518 No. 928754-000 Page 1 (11) MANUAL BC8518 No. 928754-000 Page 2 (11) Version: C1 Approved by: ME Version: C1 Approved by: ME...

  • Page 2: Electronic Lock

    Variant 2. TRANSMITTER ON Pull out the stop button and the transmitter is switched on. The operation indicator lamp (ACC.) starts blinking and the transmitter is on. ELECTRONIC LOCK If the operating indication LED is red, the electronic lock is activated.
  • Page 3 MICRO RUN SIGNAL A signal can be emitted at any time during the run and is obtained as Push in the button for MICRO and the diode lamp for micro lights. long as the push button switch is depressed. The micro-run movements are only at lowest speed in micro-run mode irrespective of the compression of the pushbuttons.
  • Page 4 TRANSMITTER LED INDICATIONS CHARGING INSTRUCTIONS • If the transmitter under start up or under operating detect a fault in The battery has got power for 12 hours continuous operation. any self-tests it will indicate with a continuously red light. After that •...

  • Page 5: Discharged Battery

    DISCHARGED BATTERY. INSTRUCTIONS FOR CRANE OPERATORS These instructions have to be followed. Marked A Li-Ion battery is environment conformed, but as usually, all batteries shall be handed back for recycling. When the battery will be changed, the used Li-Ion-battery shall be returned to the distributor, Check that the radiotransmitter operates on the crane, where a new battery is to be bought.
  • Page 6 If you loose control of the crane movements, release the pushbuttons in order to stop the crane. If still it does not stop, actuate the STOP function. Find out where the crane's main power disconnection is in order to be able to quickly switch off if required. Never hand over the transmitter to anybody who has not undergone training in radio-control crane operation.