To Replace The I-Vu® Link's Battery - Carrier I-Vu Link Installation Manual

Troubleshooting
To replace the i-Vu® Link's battery
The i-Vu® Link's 10-year Lithium CR123A battery retains the following data for a maximum of 720 hours during
power outages: time, control programs, editable properties, schedules, and trends.
To conserve battery life, you can set the driver to turn off battery backup after a specified number of days and
depend on the archive function to restore data when the power returns.
A low battery is indicated by the Battery low LED or a low battery alarm in the i-Vu CCN Plus/Pro application. You
can purchase replacement batteries from any retailer that sells a CR-123A battery.
1
Verify that the i-Vu® Link's power is on.
2
Using a small flathead screwdriver, pry up each side of the black battery clip until it is free and you can
remove it.
3
Remove the battery from the controller, making note of the battery's polarity.
4
Insert the new battery into the controller, matching the polarity of the battery you removed.
5
Push the black clip back onto the battery until you hear both sides click in place.
6
Download the i-Vu® Link.
i-Vu® Link
Installation Guide
10
CARRIER CORPORATION ©2019
All rights reserved