Display Panel Viewing Angle Adjustment; Use Of The Floppy Disk (Fd); Use Of The Memory Card - Mitsubishi A Series User Manual

2. NOMENCLATURE AND HANDLING
2.1.1 Display panel viewing angle adjustment
The display panel
is opened by sliding the two attache case style
locks and raising the lid. The viewing angle may be adjusted by
pushing the panel locking catch to the right.
Before closing the display panel, push the panel locking latch to the
right.
Handle the display panel with care to prevent damage to the Plasma
display. Ensure that the display is locked in position during use.
I
. . .
I
1
2.1.2 Use of the floppy disk (FD)
Open the FDD cover by pressing the catch in the direction indicated
by the arrow. Insert the FD with the arrow facing upwards,
To remove the FD, press the eject button.
F D (floppy disk)
2.1.3 Use of the memory card
Remove the memory card interface cover by pressing the latch.
Insert the memory card as indicated in the diagram below.
Always replace the protective cover when access to the memory card
is not required.
I
Memory card
L
2-2