TP-Link TL-WPA8630 KIT Quick Installation Manual

Quick Installation Guide
TL-WPA8630 KIT
* TL-WPA8630 KIT (European version) is used for demonstration in this guide.
Plug and Play
e
r l i n
w e
P o
N
L A
N
W A
Router
Extender
TL-WPA8630
1
Plug the adapter into a power outlet
Adapter
TL-PA8010
and connect it to the router's LAN
port via an Ethernet cable.
2
Plug the extender into a power outlet on the same electrical circuit.
Wait until the extender's Powerline LED
Note: If the LED is red or off, please refer to FAQ > Q2.
3
Connect your devices to the internet using the default SSIDs (network names) and password
on the Wi-Fi Info Card provided.
On
Attention
1. Use the product only in the upright direction.
2. Plug powerline devices into wall outlets instead of power strips.
Using a power strip will affect network performance and may even cause dropped
connections.
Wall Outlet
turns on.
Tips:
Want to unify Wi-Fi networks or
personalize your network?
See the back page for instructions.
Power Strip