Settings; My Vehicle; Appearance - TomTom BRIDGE User Manual

Settings

My Vehicle

Important: Route planning for a specific vehicle type is available only when a truck map is
installed. If a truck map is not installed, a car route is planned instead.
Select Settings in the Main Menu, then select My Vehicle.
On this screen, you can
Routes planned by your device avoid restrictions for the vehicle type, and take into account the
vehicle's specifications.
Vehicle Type

Select this setting to choose your vehicle type. When you select your vehicle, the following
details for your vehicle are shown:
Dimensions (Length/Width/Height)

Weights (Gross/Axle)

Max. speed

For vehicle types Car and Van, the dimensions, weights and maximum speed are set to zero.
To change a setting, select it and enter a value that is specific to your vehicle. You can also
leave a setting at zero so it will not be used to determine restrictions when a route is planned.
For vehicle types Bus and Truck, pre-set dimensions, weights and maximum speed are shown.
To change a setting, select it and enter a value that is specific to your vehicle.
Important: Settings that are set at zero are not used to determine restrictions when a route is
planned.
HAZMAT

If your vehicle type is Truck and you are transporting hazardous materials, select this setting to
choose the type of hazardous material.

Appearance

Select Settings in the Main Menu, then select Appearance.
On this screen, you can change these settings:
Display

Select Display to change the appearance of the display.
Route bar

Select Route bar to change the information you see in the route bar.
set your vehicle type and dimensions.
109