Charging The Tomtom Bridge - TomTom BRIDGE User Manual

5. When the status LED shows continuous green, the device is ready. Go to the BRIDGE
Developer Portal for more information about the status LED.
6. Connect a screen in one of the following ways:
A - Using HDMI for display and USB for touch.

B - Using USB and the TomTom BRIDGE Hub Viewer app on the connected Android

device.
For more information on the app, see the

Charging the TomTom BRIDGE

TomTom BRIDGE Terminal
The battery in the TomTom BRIDGE Terminal charges when you install the device in its dock and
the dock is powered or you charge using a USB cable connected to a wall socket.
You are warned when the battery level is low or critical. You lose your connection to the internet
when the battery level is low or critical. When the battery is empty, the device goes into sleep
mode.
If the battery level is very low when you switch on the device you will see a battery symbol on the
screen. Charge your device for a few minutes then it will start automatically when it has enough
power.
TomTom BRIDGE Developer
13
Portal.