Replacing The Windshield On The Microphone; Replacing The Ear Cushions; Accessories And Consumable Parts - CeoTronics CT-DECT Operating Instructions Manual

10.3 Replacing the windshield on the
microphone
Pull the windshield (Fig. 6/a) off the microphone
and replace it.

10.4 Replacing the ear cushions

Pull the ear cushion (Fig. 6/b) off the headset muff
and replace it. Ensure that the new ear cushion
fully engages.
11.

Accessories and consumable parts

Designation and description
Carrying case for transceiver headset, colour grey
Single-unit quick charger, charging time approx. 30 minutes
For a mains voltage of 100...240 V AC and for operation on a car's 12 V DC electrical
system
For a mains voltage of 100...240 V AC and for operation on a car's 12 V DC electrical
system (charger without main cord)
Single-unit plug-in charger, charging time approx. 7 hours
For a mains voltage of 230 V AC. Charger with »Euro« plug (CENELEC standard)
For a mains voltage of 115 V AC mains. Charger with »US« plug (US standard)
Ear cushion, 2 pcs.
Windshield for microphone, 10 pcs.
Comfort set consisting of 50 pcs. (25 pair-pack) sweat absorbing cotton pads
Fig. 6
14
Art. No.
40 35 030
09 10 100
09 10 110
40 06 525
40 06 530
50 00 501
50 02 201
40 10 025