CeoTronics CT-WireCom Operating Instructions Manual

Headsets for cable-bound communication

Hide thumbs Also See for CT-WireCom:

Operating instructions manual (12 pages)

Table Of Contents

Quick Links

Download this manual

CT-WireCom Headsets

for cable-bound communication

Operating Instructions

English

Revision: 02/0616  DOK 0607-be

Table of Contents

Need help?

Do you have a question about the CT-WireCom and is the answer not in the manual?

Questions and answers

Summary of Contents for CeoTronics CT-WireCom

Page 1 CT-WireCom Headsets for cable-bound communication Operating Instructions English Revision: 02/0616  DOK 0607-be...
Page 2: Table Of Contents
Contents WireCom Headset – key to Fig. 1 ....................6 CeoTronics Operating, Warning, and Safety Instructions ..............7 Description ............................ 10 Putting into operation and operation....................11 Safekeeping – storage ........................12 WireCom Headset with tone call button ..................12 WireCom Headset with PTT button ....................
Page 3 Revision: 02/0616  DOK 0607-be 3 / 16...
Page 4 Revision: 02/0616  DOK 0607-be 4 / 16...
Page 5 Revision: 02/0616  DOK 0607-be 5 / 16...
Page 6: Wirecom Headset - Key To Fig. 1
WireCom Headset – key to Fig. 1 a Right-hand headset muff f Microphone and windshield b Adjustable head band g Connection cable (example coiled cord) c Left-hand headset muff h Connection plug (example) d Ear cushion Control for microphone- or speaker e Flexible microphone boom amplification or on/off switch and control for microphone or speaker amplification...
Page 7: Ceotronics Operating, Warning, And Safety Instructions
 Use CeoTronics products only without damage and abrasion.  If repair work of any kind needs to be done to CeoTronics products, arrange for it to be performed only by the company CeoTronics or by a specialized workshop that is authorized by CeoTronics. In all other cases, our warranty and liability for the product shall lapse.
Page 8 Road traffic hazard!  Do not leave CeoTronics products lying around loose in cars, e.g. on the parcel shelf. Stow these products in a suitable, safe place in the car so that they do not present a danger to you or to other occupants of the car, if emergency braking is effected.
Page 9 The end user has to check and decide that the products can be used without risk. CeoTronics does not take over responsibility for any damage or material losses nor injuries to persons, caused by the use described above or by any other abnormal use of the products.
Page 10: Description
2.1 Additional Safety Instructions Type-tested muffs with a high degree of passive noise attenuation are used for CeoTronics headsets with headset muffs. If not stated otherwise, it is our experience that the passive noise attenuation of the headset muffs is reduced by approx.
Page 11: Putting Into Operation And Operation
(3.7) WireCom Headsets without on/off switch: When using WireCom Headsets with external power supply, e.g. by the WireCom System, the headset is ready for operation after it is connected to the WireCom System and the WireCom System is connected to its supply voltage and switched on. These headsets are not provided with an on/off switch.
Page 12: Safekeeping - Storage
Safekeeping – storage After use, keep the cleaned headset in a clean and dry place at normal room temperature and at normal relative air humidity. WireCom Headset with tone call button For putting into operation and operation of the WireCom Headset with tone call button (Fig. 3) the operating instructions in section 5 are largely valid.
Page 13: Wirecom Headset Muffs For Helmet Fastening
General – Headsets with an 9 V rechargeable battery are equipped with a battery charging socket (Fig. 9/b) which is closed off with a stopper (a). Use only a charger supplied by CeoTronics to recharge the batteries (see section 14). If other chargers are used, damage could be caused to the batteries. Take heed of the special CeoTronics operating instructions for the charger.
Page 14: Cleaning
12.2 Cleaning CAUTION When cleaning ensure that no moisture is allowed to penetrate to the inside of the unit. Do no use any solvents (e.g. benzine, alcohol etc.). Remove any loose dust with a soft brush. If necessary, clean the outside with a suitable clean tissue only slightly moistened with clear water and subsequently rub the unit dry again.
Page 15: Changing The 9 V Battery
12.5 Changing the 9 V battery Only valid for headsets with a 9 V battery (see example Fig. 11) a. From the left-hand headset muff remove the ear cushion (Fig. 11/e), the cover ring (d), the foam cover (c) as described in section 12.4.1 with the aid of Fig. 10. b.
Page 16 06295 Lutherstadt Eisleben Tel. +34 91 4608250 51 Tel. +49 34776 6149-0 Fax +34 91 4603193 Fax +49 34776 6149-11 E-Mail ventas@ceotronics.es E-Mail ctv.info@ceotronics.com Revision: 02/0616  DOK 0607-be Subject to change Copyright © 11/2010 CeoTronics AG, 63322 Rödermark, Germany, Internet www.ceotronics.com...

This manual is also suitable for:

Ct-soun