Figure 14. Marking Wall Type
If it is level, the bubble of the
spirit level is positioned at the
center of both lines.
1
Table 7. Tools for Drilling
Category
Woking Tools
Table 8. Anchor Bolt Drill Bits and Hole Depth
Category
CPE Outdoor
[Anchor Hole Cross Section]
[O]
35 mm
(1.4 in)
* Remove the debris from the drilled hole.
2
5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
To drill the anchor holes
Ensure that the items mentioned in below table are available.
Anchor Bolt
Φ 6
[X]
Drill anchor holes at the marked points. Remove dust from the holes using a
vacuum cleaner.
Unit: in. (mm)/ Marking Point
2.49 (64)
Description
Hammer Drill
Drill Bit (1/4 inch)
Vacuum Cleaner
Drill Bits
1/4 in. (6 mm)
Confidential
Chapter 2 Installing System
Hole Depth
1.4 in. (35 mm)
1/4 in.
(6 mm)
19