Transporting And Unpacking; Bringing In Items; Unpacking Items - Samsung 5G CPE Installation Manual

Transporting and Unpacking

This section details how to transport the items to the installation place and
describes the procedure to unpack cabinets and other components.

Bringing in Items

Take care of the following at each stage of transportation of the items:







Unpacking Items

To unpack the items, ensure the following:






5G CPE Outdoor Installation Manual v1.0
Copyright © 2018, All Rights Reserved.
Before moving a system, check storage place for the system and remove
obstacles in advance.
When carrying the system:
Fasten the system firmly to the transport vehicle or carrier to prevent damage
to the system from a vibration or shock.
Use an elevator to prevent accidents. However, if the system must be carried
by people, ensure there are enough people to carry the system.
The system must not be shocked physically.
Care must be taken to protect the system from dust, moisture, and static
electricity.
The items must be packed until they reach the installation place.
The items are classified in accordance with each job specification and stored at
a place that does not interfere with working.
Unpacked systems must be installed immediately. If immediate installation of
the systems is not planned, the systems must be stored in the installation place
temporarily.
Unpack only external packing, leaving the internal packing in unpacked status.
Unpack the inner packaging after each system is placed on its installation
location.
Dispose by-products (packaging waste) in accordance with waste management
rules. Do not recycle the by-products.
Confidential
Chapter 2 Installing System
11