Figure 3. Typical Dispenser Control Interface Wiring Diagram; Figure 4. Typical Installation Wiring Diagram For Dispenser Control Interface To A Dresser-Wayne Dispenser (120 Vac) - Veeder-Root 847990-001 Installation Manual
Stand-alone dispenser pan sensor with
dispenser control interface, non-discriminating stand-alone dispenser pan sensor with dispenser control interface, discriminating stand-alone dispenser pan sensor with dispenser control interface
Table of Contents
Advertisement
Dispenser Control Interface Wiring
Place the cover on the junction box and ensure that all cover screws are replaced
2.
and tight.
3.
Visually check to be sure that the security plugs, Dispenser Control Interface, and
all wiring and cables are secure.
Restore AC power to the junction box.
4.
DISPENSER
DISPENSER POWER
120 VAC
NEUTRAL
845-3
Figure 3. Typical Dispenser Control Interface Wiring Diagram
Figure 4. Typical Installation Wiring Diagram for Dispenser Control Interface to a
Dresser-Wayne Dispenser (120 VAC)
Installing the Dispenser Pan Sensor
RELAY CONTACT RATING
RED
COMBINED MAXIMUM:
120V, 8A RESISTIVE,
RED
1A PILOT DUTY
INPUT:
BLK
120VAC
4.5 VA
50/60 Hz
WHT
NEUTRAL
8
PAN
SENSOR
DISPENSER
CONTROL
INTERFACE
RELAY CONTACT RATING
COMBINED MAXIMUM:
120V, 8A RESISTIVE,
1A PILOT DUTY
INPUT:
120VAC
DISPENSER
4.5 VA
CONTROL
50/60 Hz
INTERFACE
NEUTRAL
PAN
SENSOR
Advertisement
Table of Contents
