Table of Contents
Advertisement
Installing the camera
6.6
Using the camera search application "Web cam IP manager"
18
Siemens Building Technologies
Fire Safety & Security Products
This assumes that:
The Web-Cam IP Manager and all the units are located in the same network
segment. If a device and the Web-Cam IP Manager are not located in the same
network segment, you must ensure that the associated gateway (router) passes
the SSDP multicast messages sent by the Web-Cam IP Manager to the network
segment where the device is located.
SSDP (Simple Service Discovery Protocol / network protocol)
Start the Web-Cam IP Manager by loading IP Manager.exe. This application
1.
is found on the CD included with delivery.
The Web-Cam IP Manager program window will open:
Click the Start button.
2.
The Web-Cam IP Manager program window will now display a list of all the
devices available for communication along with their IP and MAC addresses.
Each device's IP address or MAC address is unique.
Select the device whose home page you want to access.
3.
Click the Home page of selected device button.
4.
The home page of the selected device will appear. See Section 6.8: Viewing
and listening.
01.2009
Advertisement
Table of Contents
