Utility Program Application; Nas Player Setup; Audio Record Setup - Siemens CCMX1315-LP Configuration Manual

8

Utility program application

8.1

NAS player setup

8.2

Audio record setup

Siemens Building Technologies
Fire Safety & Security Products
Playing back NAS file
This application is found on the
Execute NAS record setup first.
1.
Click on the cross cursor button and choose the path of the NAS file to be
2.
played.
Click on the Play button.
3.
Click on the Stop button.
4.
This application is found on the
voice file, then upload it to the network camera. It can make an alarm out event.
After you finish audio record, please perform alarm audio setting.
Perform audio recording in the following sequence
Execute audio record setup first.
1.
Click on the cross cursor button and choose the path where you want to save
2.
the *.wav file.
Install a speaker before you start recording your voice.
3.
Click on red button and start recording your voice.
4.
Click on Stop button.
5.
Recording is now finished.
CD included in the delivery.
CD included in the delivery. You can record a new
Utility program application
01.2009
55