Snooze - Siemens 4100 Series User Manual

Router User's Guide

Snooze

The snooze feature allows you to temporarily disable the firewall for a set amount of time so outside
support personnel can access your Router or network or so you can run an application that conflicts with
the firewall. Note: Important! This function is recommended for use only when you require this special
level of unrestricted access as it leaves your Router and network exposed to the Internet with no firewall
protection.
To enable and configure snooze control:
1. Select Setup>Firewall>Snooze from the left navigation pane of the Web interface. This displays the
"Firewall Snooze Control" window.
2. Select one of the following:
• Disable Snooze
Disables all snooze control. In this mode, the firewall is not disabled.
• Enable Snooze, and set the Snooze time interval to
Enables snooze for a specified time period. Be sure to enter the number of minutes to define how
long the firewall should be disabled.
• Reset the Snooze time interval to
Reset the snooze control time period. Use this option if you need a time extension for an open
snooze session. Be sure to specify the additional amount of time (minutes) the firewall should be
disabled.
3. Click Apply.
44
Monitoring Network Health