Table of Contents
Advertisement
Installation
9.
The Windows OS will find the drivers for "NEC USB
Open Host Controller". Click "Next".
10. The Windows OS may ask you for the Windows OS
installation CD. If prompted to, insert the CD
into the CD-ROM drive and follow the
subsequent instructions.
11. After the Windows OS installs the required drivers,
installation of the first host controller is complete.
Click "Finish".
12. The "Add New Hardware" wizard will repeat the
installation process for the second OHCI host
controller.
13. Repeat steps 7-11.
14. After installation of the two OHCI host controllers,
the Windows OS will detect "PCI Universal Serial
Bus". This is the USB 2.0 EHCI host controller.
15. The "Add New Hardware Wizard" dialog box will
open. Click "Next".
16. Select "Search for the best driver for your device"
and click "Next".
17. Check the "CD-ROM drive" box. Click "Next".
18. The Windows OS will locate the driver for "Belkin
USB 2.0 Hi-Speed Host Controller". Click "Next".
(continued)
6
Advertisement
Table of Contents
