Table of Contents
Advertisement
Installation
Installation Procedure for Windows Me OS
This installation procedure will successfully install two
USB OHCI host controllers and a single USB 2.0
enhanced host controller.
1. Locate an available PCI slot on your computer.
2. Insert the PCI Card into the slot. Apply pressure as
needed until it is fully seated.
3. Insert the Belkin USB 2.0 driver installation CD into
your computer's CD-ROM drive.
4. After installing the PCI Card, turn on your
computer.
5. After loading, the Windows OS will detect "NEC
USB Open Host Controller (E13+)". The required
driver support will be automatically installed. No
user input is required.
6. The Windows OS will detect "PCI Universal Serial
Bus". This is the USB 2.0 EHCI controller. The "Add
New Hardware Wizard" window will appear.
7. Select "Automatic search for a better driver
(recommended)". Click "Next".
(continued)
10
Advertisement
Table of Contents
