Belkin P73941 User Manual page 11

7. A new "Found New Hardware Wizard" window
will open. Check the "CD-ROM drive" box.
Click "Next".
8. The Windows OS will find "Belkin USB 2.0
Hi-Speed Host Controller". Click "Next".
9. The Windows OS will now install the "Enhanced
Host Controller" driver. Click "Finish".
10. Installation of the USB 2.0 Dual-Port PCI Card is
now complete.
Verifying Proper Installation (Windows 2000 OS)
After installation, check the Windows OS's
Device Manager to confirm that the PCI Card has
been installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the
"Device Manager" button.
4. Click the plus sign (+) next to "Universal Serial
Bus Controllers".
The "Device Manager" list will now include two "NEC
USB Open Host Controller" entries, one "Belkin USB
2.0 Hi-Speed Host Controller" entry, and two
additional "USB Root Hub" entries.
Installation
(continued)
9