Gigaset 11 User Manual page 33

Wireless LAN Monitor Utility
After adding several profiles into Preferred Networks, you can change the order in
which connection attempts to preferred networks are made. Just select the target wire-
less network and click Move up or Move down to move it to the desired position.
To Access Certain Wireless Networks Only
If you just want to access certain wireless network types, click the Advanced button on
the Wireless Networks tab in the Wireless Network Connection Properties window
on page 31 to open the Advanced window. You can choose to connect to the following
networks:
Any available network (access point preferred)
◆
Access point (infrastructure) networks only
◆
Computer-to-computer (ad hoc) networks only
◆
The default network type is Any available network (access point preferred). In this
network type, your wireless network adapter will connect to any Access Points or wire-
less network adapters (ad hoc mode) available in the air but Access Point always
demands a higher connection attempt priority.
32