The Gigaset HomePlug AV 200 The Gigaset HomePlug AV 200 The Gigaset HomePlug AV 200 is a network adapter that offers high-speed data communication reliably and cost-effectively via the existing mains supply. It can be used at home or also in small offices, thus eliminating the laying of network cables throughout the house or office.
Further details are available from the following explanations: PC – PC Communication You can use the Gigaset HomePlug AV 200 to set up a local network. All PCs in this network can communicate with one another and share the following elements:...
Connecting PCs to the Internet The Gigaset HomePlug AV 200 allows all connected PCs to access the Internet via your ADSL routers or your modem even if a connection via LAN cable or wireless connection is difficult or not possible.
There is often no DSL connection in the room in which the television is located. This means that cabling would be necessary in order to bring Internet television to your television. However, the Gigaset HomePlug AV 200 allows you to set up this connection via the mains supply.
The Powerline network is ready to use immediately. No further configuration is needed. Extended configuration To set up a larger network with more than two Gigaset HomePlug AV 200, you have to: ì Establish the desired connections with the Gigaset HomePlug AV 200 (p. 9).
A quick reference guide A detailed user guide (CD-ROM) System Requirements To operate a Powerline network, the devices that are to be connected to the Gigaset HomePlug AV 200 must have an Ethernet LAN port. Operating Displays and Connections Front Side...
Adapter for EU-sockets The following elements can be found on the underside of the Gigaset HomePlug AV 200: Element Description Jack with automatic recognition of the transmission rate (RJ- 45). Synchronisation key Key for synchronising the Gigaset HomePlug AV 200.
Connecting the Gigaset HomePlug AV 200 To connect PCs to your Gigaset HomePlug AV 200 check first to make sure there is an Ethernet LAN port on these PCs. If this is not the case, you can connect an Ethernet network adapter to the PC.
Carry out the following steps here: Connect all Gigaset HomePlug AV 200 to the mains supply. Reset the network ID of each individual adapter (p. 11). Press the synchronisation keys for both adapters in succession for two seconds each.
Resetting the Network ID The network ID must always be reset before a HomePlug AV 200 can resynchronise. This also means that all adapters have to be reset and then resynchronised to change the network ID of a Powerline network.
Appendix Appendix Problem Handling The Gigaset HomePlug AV 200 can be checked using the LED display. The following table may provide assistance should problems arise. Symptom Possible cause and solutions The Power LED does No power supply. not light up.
Appendix Specifications Model: Gigaset HomePlug AV 200 LAN interface: RJ-45, 10/100Base-T Fast Ethernet LED: Power (power supply) LAN (connection to devices) Link (data transmission, synchronisation) Mains voltage: 100 to 240 V AC / 50/60 Hz Current consumption: approx. 4 watt Ambient temperature: Operating temperature 0 °C to 40 °C...
Appendix Service (Customer Care) We offer you support that is fast and tailored to your specific needs! Our Online Support on the Internet can be reached any time from anywhere. http://www.siemens.com/gigasetcustomercare It provides you with 24/7 support for all our products. It also provides a list of FAQs and answers plus user guides and current software updates (if available for the product) for you to download.
Appendix Guarantee Certificate United Kingdom Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below: In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
Page 17
Appendix at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts sub- ject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase.