Table of Contents
Advertisement
Troubleshooting
9. Troubleshooting
This section is a list of potential problems and solutions.
If the solution listed fails to correct the problem, call the
manufacturer at the numbers and address printed on the
back cover of this manual. Please have the model
number, and serial number of your jack available. The
serial number is located on the capacity tag on the top of
the head plate.
Problem
• Inadequate air pressure; Increase air
pressure but do not exceed 200 psi.
Fails to lift load
• Airline leaks; locate and correct leaks.
Overloaded; use larger-capacity jack.
•
• Stand pin not engaged.
Fails to hold load
Cause/Solution
CLS-10/CLS-15 | 11 | en
Advertisement
Table of Contents
