Starting Watering Programs; The Watering Frequency Can Be Selected By - Gardena C 1060 plus Operating Instructions Manual

7.
8.
Starting watering
programs :
2.

The watering frequency can be selected by :

• the (7.) watering cycle (right hand column of the display)
– or –
• the (8.) watering days (left hand column of the display).
7. Select watering cycle with the rotary button
(E.g. 2nd) and confirm by pressing OK.
24h / 2nd / 3rd / 4th / 5th / 6th / 7th :
Watering every 24 hours / every 2. / 3. / 4. / 5. / 6. / 7. days
The week preview is displayed in the left hand column for
2 seconds.
The ticker Select program no. appears and the display
jumps back to Step 2 and the next program number up flashes.
– or –
8. Select each watering day with the rotary button
(E.g. Mo, Fr Monday and Friday) and confirm by
pressing OK.
The ticker Enter watering days appears.
9. Press the Menu button
The ticker Select Program no. appears.
The display jumps back to Step 2 and the next program
number up flashes.
6 6
If program number has been created the ticker Watering
programs ON is displayed.
O O N N
Prog flash on the display.
If not all 6 programs are to be entered you can use the menu
button to switch to the "Start watering programs" display level.
O O N N
The Prog must be selected so that the watering programs
O O F F F F
can start. If Prog
not run.
1. Press Menu 3 times (not necessary if the program has already
been created with program number
O O N N
2. Select the Prog
pressing OK.
The ticker Programm OK is displayed for 2 seconds and then
the display jumps to the normal display.
The Water Computer has now been programmed, i.e. the inbuilt
valve opens and closes completely automatically and thus waters
at the programmed times.
O O F F F F
Even if the Prog is selected watering can be done manually.
is selected the watering programs do
6 6 ).
with the rotary button and confirm by
9