Table of Contents
Advertisement
Entering watering
program :
1.
2.
3.
4.
5.
6.
8
Program-controlled watering (Prog 1 - 6) :
Up to 6 programs can be entered using program-controlled
watering (Prog
1 1
to
6 6
1. Press Menu-key twice
(not necessary if the current time and day of the week
has been entered).
The ticker Select program no. appears.
Prog and the program number flash on the screen.
2. Use the rotary button to set the program number (E.g. Prog
and confirm by pressing OK.
The ticker Enter watering start time appears.
Start and the hour display will flash on the screen.
3. Set the hours for starting the watering time with the rotary
6 6
button (example:
Start and the minutes section flash on the display.
4. Set the minutes for starting the watering time with the rotary
2 2 0 0
button (example:
The ticker Enter watering duration appears.
Run Time and the hours for the watering time flash on the
display.
5. Set the hours for the watering time with the rotary button
0 0
(example:
hours) and confirm with the OK-key.
Run Time and minutes for the watering time flash on the
display.
6. Set watering time minutes with the rotary button
1 1 0 0
(example:
minutes) and confirm with the OK-key.
The ticker Enter watering frequency appears.
Watering cycle
24h flashes on the display.
).
hours) and confirm with the OK-key.
minutes) and confirm with the OK-key.
3 3
)
Hide quick links:
Advertisement
Table of Contents
