Siemens P User Manual page 18

Safety Instructions for hearing systems with audio input
The audio input may be connected to line-operated equipment
only if the equipment fulfils the safety requirement IEC 65 / DIN
VDE 0860.
Note when controlling your ACURIS instruments audio
input with the ePocket:
If an audio shoe is attached to one or both of your ACURIS
hearing instruments, the program button on the ePocket
or on the instruments can be used to select the audio mode
(such as only audio, only microphone, or audio and micro-
phone). The volume can be changed normally using the
ePocket.
If you are wearing one ACURIS hearing instrument with
audio input capability and one without (for example, if you
are wearing a Behind-the-Ear instrument and In-the-Ear
instrument), the instrument with the audio shoe connected
cannot be controlled using the ePocket.
18
Turning off an instrument with
audio shoe attached
Press the audio shoe up in the
back, until the battery compart-
ment opens and catches on the
first stop.
Removing the audio shoe
Press the audio shoe toward the
front. Then unhook it and close
the audio input flap.