Table of Contents
Advertisement
Chapter 3
Configure a ControlNet Module
30
Add and Configure a Local ControlNet Module
After you have started RSLogix 5000 software and created a controller project,
you can add ControlNet communication modules. A local ControlNet module is
a module that resides in the same chassis as the controller.
When you create a new RSLogix 5000 project with the CompactLogix
IMPORTANT
1769-L32C or 1769-L35CR controller, the Controller Organizer creates a
ControlNet port in the local chassis. In this case, you do not need to add a
separate local communication module.
To add a local ControlNet module, follow this procedure.
1. In RSLogix 5000 software, right-click I/O configuration and choose New
Module.
2. From the Select Module Type dialog box, expand Communications,
choose the local ControlNet communication module, and then click OK.
IMPORTANT
Rockwell Automation Publication
This procedure shows the New Module dialog box for a
1756-CN2R/B. However, various dialogs appear during
configuration depending on the ControlNet module you select. For
help configuring a module, refer to the online help in
RSLogix 5000 software.
CNET-UM001E-EN-P - June 2016
Advertisement
Table of Contents
