Siemens S40 User Manual page 24

Siemens cell phone user guide
Hide thumbs Also See for S40:
Table of Contents

Advertisement

44
Messages
Options with your messages
First
In addition to reading your mes-
Enter the List menu
sages, you can select the mes-
by pressing
sage, press »OPTION« and:
Select »Messages«
• Delete it
• Send a reply (only in inbox)
Outbox If you have entered an
• Forward it to another phone
SMS message, but do not want to
number
send it right away, you can store it
• Edit it before sending it
in the Outbox by selecting »Save
• Print it via IrDA
message«.
• Call back the sender (only in
inbox)
Sent items The messages you
send are automatically stored
New message To send a message
under »Sent items« from where
you have to specify certain parame-
they can always be retrieved again.
ters if these have not already been
specified by your network operator.
Drafts If you do not want to send
Enter the Message setup menu to
your message right away and have
set up these parameters once and
not yet decided how to send it,
for all – otherwise you will be
select »Save message«, and your
asked to specify them each time
message is automatically stored in
you wish to send a message.
»Drafts«.
By default, your phone is set to
use the Wheel mode editor when
composing your message. How-
ever, you may find it more conve-
nient to switch to the built-in T9®
List menu
text input feature. T9®enables you
• Send as SMS
to compose text messages with
To be able to send SMS messages
only one keystroke per character.
you have to enter your network
(See p. 46).
operator's telephone number for
this special service and to set up
Once you have selected »New
different parameters for your mes-
Message«, you can start
sages. Enter the Setup menu to set
entering your message.
up these parameters once and for
Press »OK« when you have
all. See p. 67.
completed your message.
• Send via IrDA
Select whether you want to
If you select »Send via IrDA«, your
send the message as an SMS
phone will automatically activate
message or via IrDA.
the IrDA port. If a connection is
Press »YES« to send the mes-
established successfully, the IrDA
sage. Press »NO« to store it
port will automatically be deactivat-
in your Outbox.
ed after the end of the transmis-
sion.
Select »Save message« if you
want the unspecified message
within 1 minute, the IrDA port will
to be stored in »Drafts«.
automatically be deactivated and
you will have to try again.
List menu
If no connection is established
45
Facts & Tips
• If while writing a message you are
interrupted by an incoming call, your
message will be stored automatically
in
»Drafts«
.
• When communicating via IrDA, the
recommended distance for optimum
transmission between your mobile
phone and the receiving unit is 10
centimeters.
• Remember, your first responsibility
is safety. Use extreme caution with
using message features while driving.

Advertisement

Table of Contents
loading

Table of Contents