Siemens CF75 User Manual page 127

126 Questions & Answers
Problem
No WAP access,
downloading not
possible.
Text message
cannot be sent.
EMS pictures &
sounds are not dis-
played at the desti-
nation phone
No Internet access
possible.
PIN error/
PIN2 error.
Phone code error.
Service provider
Code error.
Too few/too many
menu entries.
No fax possible.
Charge meter does
not work.
Damage
Severe shock.
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat.
Reset all settings to factory default, p. 86:
Possible causes
Profile not activated, profile
settings wrong/incomplete.
Service provider does not sup-
port this service.
Phone number for service
centre not set or incorrectly set.
SIM card contract does not
support this service.
Service centre too busy.
Recipient does not have a
compatible phone.
Destination phone does not
support the EMS standard.
Incorrect WAP profile set, or
wrong or incomplete settings.
Three wrong entries.
Three wrong entries.
No authorisation for this service. Contact your service provider.
Functions may have been add-
ed or deleted by the service pro-
vider via the SIM card.
Wrong settings in the PC.
No authorisation for this service. Contact your service provider.
Charge pulse is not transmitted. Contact your service provider.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Dry connector contacts thoroughly. Stand mobile upright in an air current.
Do not dismantle the phone!
Possible solution
Activate or set WAP profile (p. 72). If necessary ask
your service provider.
Contact your service provider.
Set service centre (p. 47).
Contact your service provider.
Repeat message.
Check.
Check WAP settings; (p. 72) contact your service
provider if necessary.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Contact Siemens Service (p. 127).
Check with your service provider.
Check settings (p. 90).
*
# 9 9 9 9 #
A