Siemens A50 User Manual page 38

Setup
Preparation of the phone for Internet
access depends on the service pro-
vider currently used:
• If the settings have already been
made by your service provider you
may begin immediately.
• If access profiles have already
been assigned by your service
provider select a profile and acti-
vate it (p. 38).
• The access profile must be set
and activated manually.
If necessary, check with your service
provider for details.
Profiles
You can set or change up to 5 access
profiles (may be barred by your serv-
ice provider). The entries and func-
tions may vary depending on your
service provider. You can change a
profile each time before accessing
the Internet (p. 38).
Profile settings
To create a new profile proceed as
follows:
Surf & fun
§Menu§
Profiles
N
Select a profile.
The entry card is
§Change§
displayed.
N
Make your entries field
by field.
You may get further information on
the entries from your service
provider.
Surf & fun
Internet
Profile name Name the profile or change it.
WAP IP address: *
Parameters Enter IP address.
~
Port: *
Enter port number.
Homepage:
Enter homepage (p. 35) if not
set by the service provider.
Linger time:
Enter time in seconds after
which a connection should be
terminated if no input or data
transfer takes place.
CSD settings Dial-up no.:
Enter ISP number.
Call type:
Select ISDN or Analogue.
Login name:
Enter login name.
Password:
Enter password (shown as a
series of asterisks).
§Save§
The settings are stored
and the profile list is
shown.
* depending on service provider, enter
2nd IP address and 2nd port if nec.
37