Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored.
If the SIM card has been delivered in
credit card size, snap the smaller
segment out and remove any rough
• Press grooved area
• Press latch in the direction indicat-
ed by the arrow
the cutout on the side of the
, then tilt upwards and re-
, then lift
, Lift battery at
• Insert SIM card in the opening
(contacts pointing downwards)
and push gently until it engages
(make sure the angled corner is in
the correct position
• Insert battery into the phone side-
, then press downwards
, until it engages.
• Replace cover and press down-
wards until it engages.
Only 3-Volt SIM cards are supported. Older
SIM cards (5-Volt technology) cannot be
used. Please contact your service provider,
if you have an older card.