e2v ARGUS 13 Users Manual And Warranty Terms page 31

Firefighters’ solid-state through smoke vision system. thermal imaging camera and charger/battery packs
Table of Contents

Advertisement

To replace the handles, remove all screws using a 2 mm hex key. Remove the
handles and discard the screws, as replacements will be supplied. Replacement
is the reverse of removal.
Bumpers
Left Bumper: DPP701141AA.
Right Bumper: DPP701142AA.
The bumpers are supplied without side straps (see below for details). To replace
the bumpers, remove the screws using a 2 mm hex key. Remove the crosshead
screws, remove the side straps from the bumpers and discard the screws, as
replacements will be supplied. Replacement is the reverse of removal.
Side Straps DAS542693AA
To replace the side straps, remove the screws holding the bumpers to the
camera using a 2 mm hex key. Remove the crosshead screws and remove the
side straps from the bumpers. Replacement is the reverse of removal.
Lens Bezel (state colour when ordering)
DAS701204AA (Blue)
DAS701204BA (Orange)
DAS701204CA (Yellow)
To replace the lens bezel, remove all screws using a 2 mm hex key. Remove the
lens bezel and discard the screws, as replacements will be supplied. Replacement
is the reverse of removal.
27

Advertisement

Table of Contents
loading

Table of Contents