Cleaning, Maintenance And Replacement Parts - e2v ARGUS 13 Users Manual And Warranty Terms

6 Cleaning, Maintenance and
Replacement Parts
Cleaning
.
After use and prior to stowing, the camera should be cleaned. This is best carried
out using a cloth soaked with warm soapy water. Solvents should not be used.
If in doubt, contact your supplier.
Maintenance
.
No routine maintenance is required for the camera. If it is not in regular use, it
should be switched on for 10 minutes every month to check correct operation.
Replacement Parts
.
Due to the environment in which the camera is used, the user can replace certain
parts. If any damage beyond these parts occurs, return the camera to e2v
technologies or an authorised repair centre.
Any attempt at repair by unauthorised personnel may cause serious damage and
will invalidate the warranty. THERE ARE NO OTHER USER-SERVICEABLE
PARTS.
Handles (state colour when ordering)
Left Handle:
DAS701201AA (Blue)
DAS701201BA (Orange)
DAS701201CA (Yellow)
Right Handle:
DAS701202AA (Blue)
DAS701202BA (Orange)
DAS701202CA (Yellow)
26