Table of Contents
Advertisement
Setup Tab
Open up the software and click
the Setup tab. This area allows the
end-user to enable, disable, select
and set up various functions on
the camera. When the tab is
initially pressed, the settings of
the camera attached to the
laptop/PC will be shown.
Customer Configuration Frame
These two area allow the end-user
to configure various functions of the camera. These are:
Time and date enable/disable; check as required.
Zoom enable/disable; check as required.
Temperature sensors enable/disable; check as required.
Select Celsius or Fahrenheit; check as required.
Select Black or White Hot; check as required.
Temperature Colour Bar enable/disable; check as required.
On-Screen Graphics in or out (see note); check as required.
Transmitter enable/disable; check as required.
Note: The graphics in/out function is only necessary if the graphics are unable to
be seen when using an external monitor.
Picture Colouration Frame
This area allows the user to select the colour option for the camera screen. From
the drop-down menu, select the required colouration and click select.
LCD Set-up Frame
This area allows the user to select the LCD brightness, contrast and colour levels
for the camera screen. From the drop-down menu, select the required level and
click config.
23
Advertisement
Table of Contents
