Table of Contents
Advertisement
If the connection to the camera is unsuccessful, exit from the software by
clicking exit. Start the customer sofware and wait until the test software front
screen opens. Using the com port drop-down menu, set the com port to 2 and
click set. Click connect to camera. If the connection to the camera is still
unsuccessful, check all the leads are firmly home.
Set Time and Date
.
Open up the software and click
set time and date. A new
window will open. This area
allows the user to set the time
and date. To set the time and date,
click get time from the PC, then
click send. This will set the camera
to the time and date as per the
laptop/PC.
If this time or date is incorrect,
click edit time and date and from
the drop-down menus for hours,
minutes, day, month and year
select the correct time and date and click send.
Once complete, click close to return to the software front screen. Click exit to
close the software.
Stored Images
.
Open up the software and click
stored image. This area allows the
end-user to download stored
images from the camera.
View Images Frame
This area allows the end-user to
view or delete images from the
camera.
20
Advertisement
Table of Contents
