Table of Contents
Advertisement
Remote Control Tab
Open up the software and click
the Remote control tab. This area
allows the end-user to perform
various functions of the camera
remotely via a laptop/PC.
Zoom In and Out Button:
Allows the end-user to zoom
the camera in or out.
Store Picture Button:
Allows the end-user to store an
image.
Transmitter Channel Control
This area allows the user to select the transmitter channel and by doing so turns
on the transmitter. Only the channels avaliable will be highlighted. To turn off
the transmitter, click all tx chn off.
Uploading Splash Screen Tab
Open up the software and click
the Setup tab. This area allows the
user to upload a splash screen of
their choice to the camera.
To upload an end-user splash
screen, the image to be uploaded
must be a 320 x 240 pixel bitmap.
Click open and a new window will
open. Select the folder the image
is saved in and click open. The
selected image will appear in the
image window.
If this is correct, click send splash. Once the upload has been completed, turn
the camera off and then on again and check the selected image is the splash
screen.
24
Advertisement
Table of Contents
