Panasonic AK-MSU935AP Operating Instructions Manual page 37

SD memory card sub menu
3) When the SD memory card has been inserted, LOAD is selected as the "MODE" setting in the "files present" status, and the
cursor is at the second hierarchical level
When the following has been selected at FILE SEL in the SD memory card LOAD status, the files displayed in the PUT file
area will be as follows.
 SCENE: CURRENT, SCENE1 to 8
 REF: CURRENT, REF1 to 3
 LENS:
LENS01 to 16
<Screen 3-3>
Only the bottom is
changed using the
To screen 3-1
rotary encoder.
4) When the SD memory card has been inserted, LOAD is selected as the "MODE" setting in the "files present" status, and the
cursor is at the third hierarchical level
<Screen 3-4>
To screen 3-3
< SD CARD >
STATUS MODE
FILE SEL GET FILE
Both the top and the
bottom are changed
using the rotary encoder.
FILE SEL GET FILE
SCENE FileName
< SD CARD >
STATUS MODE
FILE SEL GET FILE
EXECUTE
No change
EXECUTE
37
M-PED SHUTTER M-GAIN
0 100 0dB
MAIN MENU
PUT FILE EXECUTE
Only the bottom is
changed using the
rotary encoder.
PUT FILE EXECUTE
SCENE1 YES ?
M-PED SHUTTER M-GAIN
0 100 0dB
MAIN MENU
PUT FILE EXECUTE
YES NO
To screen 3-5
YES NO
--> -->
To screen 3-4
To screen 3-3